Five interior areas of application for ‘smart’ textiles
Meanwhile, German textile research’s dialogue with the automobile and motor-vehicle industry has moved on considerably; Sabine Gimpel, Head of Marketing at the TITV, identifies several areas of application for smart textiles in car interiors, from the point of view of her research institution which specialises in textile micro-systems technology. Looking at electrically powered vehicles then this might, for instance, be new kinds of seat heaters. “Up to now, they have been deep in the squab. But there, the covering material acts as insulation. With new materials, it is possible to build the heating elements into the seat covers, the arm rest surfaces or the door panels and thus design the seat construction to be much lighter.”
Ms. Gimpel sees further opportunities in applications using sensitive textile panels for, say, determining what is on a seat squab (in a crash, if, say, there is only a handbag on the passenger seat, then the airbag won’t deploy) and for monitoring bio-signals by means of textile sensor technology to check on the driver’s current state of health. Ms. Gimpel, an expert in this field, is convinced that light-emitting textiles with woven LED threads and glare-free light sources, as well as woven electroluminescent surfaces, will meet the need for both orientation and ambience in cars of the future. In Greiz, continues the Head of Marketing, there is a technology that is just now reaching the operational stage of industrial – and hence cheap – manufacture of light-emitting textiles. With this technology, LEDs can be attached to conductive threads using an embroidering machine and the (soldered) contact then created. When this material is mass-produced, headlinings can be illuminated in a way that both saves energy and is individually tailored to the taste of the purchaser; so, too, can interior door panels.
Company network develops textile switches
At Techtextil, which sees itself both as a leading world trade fair and a driver of innovation at one and the same time, just on a dozen companies will be showcasing their new products for vehicle interiors. Exhibiting with us for the first time are two company networks, sponsored by the Federal Ministry of Economics and managed by Steffi Volland (Oelsnitz / Saxony): InoRetex and LanoTex – both represented on the joint service providers’ stand ‘Nord-Ost-Textil’ (North East Textiles). “We have just received the official go-ahead for the LanoTex pilot project ‘Integration of electronics’,” says the network co-ordinator with some pleasure. This secures the development of a textile touchpad for use in vehicle and aircraft seats until the end of 2014. The aim is to integrate sensor technology into seat and headrest covers that will, for instance, control the seating position, the LED lighting or digital multi-media functions. The embroidery companies from the area around Plauen will contribute their experience of the relevant technology to achieve this.
Adjustable feel-good colours for bus passengers
While we are on the subject of light-emitting textiles, the lighting laboratory at the The Institute for Textile and Process Technology (Institut für Textil- und Verfahrenstechnik – ITV), which has the lead role in the project, is researching and demonstrating the properties of new types of light-emitting fibres that they have manufactured themselves; properties that are largely unknown, other than to a specialist public. The materials can be produced in any desired shape or colour, and at the same time produce a powerful light source, either by emitting light themselves or by being back-lit with LEDs across a wide area and, if required, also with a sense of three-dimensionality. This laboratory, one might add, is where notions of active lighting in interiors for the big motor manufacturers first begin to take shape, using structured methods for generating ideas.
Even bus, train and tram manufacturers have beaten a path to the door of these textile researchers, since the possibility of visual effects with textiles, based on active and passive light-emitting threads may well give new directions to their mobility solutions of tomorrow. “We are pushing forward some exciting research for HGVs, buses and aircraft,” says Laboratory Director Christoph Riethmüller, referring to projects that are financed by industry. For example, under the heading of ’emotional lighting’, they are working on a new kind of lighting design that can be coordinated with the optimum comfortable temperature. In this way, the passengers’ subjectively differing perceptions of temperature can, to a large extent, be reduced to a common denominator by the effects of the lighting controls.
A specialist in the field of leather research, FILK Director, Prof. Dr. Michael Stoll, stresses the issue of weight reduction in the cabin interior through new combinations of materials, innovative seaming techniques, composite technologies and layering methods such as lightweight textile construction and organic electronics. When it comes to issues of feel / soft touch / and a sense of comfortable well-being, his team is continuing, on the one hand, to focus their attention on determining and objectively describing haptic parameters; on the other hand, their agenda consists of the targeted adjustment of haptic properties to produce pleasant sensations of touch using new kinds of surface structuring and layering techniques. On top of this, the Freiberg scientists are working on a passive cooling system for the seats to make them more comfortable to sit on. With a glance towards electric vehicles, they are also trying to create a defined level of air-permeability and/or circulation, with the help of optimised and cleverly combined materials, yet without, at the same time, affecting any other material properties.
Techtextil in Frankfurt next June, at which Research and Development will be just one of eleven product groups, is once again expecting some 25,000 visitors from about 100 countries. There are also five other trade fairs of the same name in the most important sales regions of the world: in 2013, trade fairs will be held in Anaheim / USA and Mumbai / India. Texprocess, Leading International Trade Fair for Processing Textile and Flexible Materials, will be held concurrently with Techtextil from 10 to 13 June 2013.