EXECUTIVEPAGESPoor Pressing: Where ironing is not done in proper
way.
Recommended Solutions:
-Temperature control set properly.
-Iron should heat completely before pressing.
-No malfunctioned steam control.
Run of Stitch: Where stitch is remain continuous
unnecessarily.
Recommended Solutions:
-Operator should not pulling fabric during sew-
ing.
-Use accurate sewing procedure.
Shading: Fabric shade variation is the variation of
shade or depth of color in same fabric roll.
Recommended Solutions:
-Numbering of each single parts of garments
should be accurate.
-Operator must check the garments number be-
fore sewing.
Sagging on Rolling Pockets: Where the pocket
rolls over after stitching and does not lay even.
Recommended Solution:
-Operators are not holding pocket back exces-
sively.
-Ensure the body and pocketing is shaped cor-
rectly and extra fabric does not put inside dur-
ing sewing.
-Pocket need to cut according pattern and not
too much deep.
-Inside of the pocket reinforcement tape can use.
Shining Mark: Over heated iron may melt the fi-
ber of the fabric which create shining mark.
Recommended Solutions:
-Use proper temperature during iron.
-Iron must heat completely before use.
-Steam control should not malfunctioned.
-If ironing is too heavy, there might be shining
mark on garment.
NCM-APRIL 2020
29